Isokinetic sampling probe EN13284-1
The CDL-Tecora isokinetic sampling probe is designed to measure dust and particle concentrations in industrial ducts according to the main international reference methods. Compatible with the requirements of EN 13284-1, ISO 9096 and US EPA Method 17, it allows to carry out reliable measurement campaigns as part of the control of atmospheric emissions.
Its modular design facilitates adaptation to different chimney configurations while ensuring compliance with the necessary conditions for representative sampling.
Measuring dust in a chimney with optimal precision
Isokinetic sampling consists of collecting the particles at a speed identical to that of the gas stream in order to avoid overestimating or underestimating the measured concentrations.
Thanks to its studied geometry and its compatibility with regulatory measuring equipment, this probe contributes to the quality of environmental monitoring campaigns and regulatory controls.
Configuration adaptable to all industrial installations
Modular assembly by 1 meter extensions
The probe consists of an end part that can be connected to several extension tubes. This architecture makes it easy to adjust the total length depending on the diameter of the pipe or the position of the measuring points.
The 1-meter extension cords also simplify transport and storage of equipment.
Version with vertical filter holder
The angled configuration at 90° allows the filter holder to be positioned parallel to the flow of fumes. This design limits the necessary rinsing volumes and improves the quality of measurements when PM concentrations are low.
Version with horizontal filter holder
The straight configuration facilitates handling on small diameter conduits while reducing the risk of sample loss during system disassembly.
Compatibility with in-situ sampling equipment
The probe is compatible with a wide range of accessories used in atmospheric emission measurement applications:
- 47 mm filter holder,
- impactors,
- dust sampling systems,
- Pitot tubes,
- isokinetic nozzles,
- environmental monitoring equipment.
This compatibility meets the needs of many regulatory measurement methods.
Robust design for industrial environments
Made of AISI 316 stainless steel or titanium depending on the application, the probe withstands conditions encountered in demanding industrial processes.
The materials used guarantee excellent mechanical and chemical resistance during measurement campaigns on combustion plants, energy recovery units or industrial processes subject to environmental control.
Applications of isokinetic sampling
Measurement of dust in a chimney
Control of atmospheric emissions
Regulatory oversight of industrial releases
Measurement campaigns EN 13284-1
Environmental compliance check
Measurement of particulate matter in flue gases
Technical characteristics
- EN 13284-1 compliance
- ISO 9096 Compatibility
- US EPA Method 17 compatible
- Stainless steel AISI 316 or titanium
- Modular assembly
- Extensions of 1 meter
- Vertical or horizontal filter holder
- Isokinetic nozzle kit
- Pitot tube compatibility
- Installation on sampling flanges
Toggle title
FAQ
Why use an isokinetic sampling probe?
It makes it possible to obtain a representative sample of the particles present in the gas stream while complying with the flow conditions imposed by the reference methods.
What standard governs the measurement of dust in chimneys?
Standard EN 13284-1 is the European reference for determining low dust concentrations in channeled emissions.
What materials are available?
The probe can be made of AISI 316 stainless steel or titanium according to the process constraints.
Can it be used with different filter holders?
Yes, it is compatible with the main in situ sampling equipment used in environmental applications.
+33 1 82 88 92 45 – commercial@tecora.com
| Marque | CDL-Tecora |
|---|
